07 700 king quad clutch upgrade

[JAK]

Hey guys, new to the forum here. I have a 07 king quad that i ride mostly in the mud/water. The only upgrades i have now are the 26" mudlights and snorkels. im looking to put in a new clutch kit being that mine was under water so much before the snorkels. As of now it will be on the 26's for at least a couple months but plan to be on 28s then. Any sugestions on what type/style clutch? Thanks, JAK

[Vandodger]

If I were you I'd look into installing a Coop45 Mod on your clutch. basically all your doing is adding a couple shims to your primary clutch. here's the link:
Nyroc's ATV info website I hope it works out for you

[munhoez]

The epi clutch kit is a good one. There is also one by dalton but havent installed much of those. The coop 45 mod will only get u so far, and is only 1/3 of a complete clutch kit. The coop 45 mod is like adding stiffer centrifugal springs( these springs come in the epi kit along with the yellow sec spring, and lighter pri. weights). Just keeps the gearing lower for a longer time since KQ's came with a bottom end lag installed from factory. It also raises ur engagement from 1100 rpm to 19-2100 rpm depending on the yr of King. If u want to save money, id do the coop45 mod, drill ur weights, order and install the yellow sec spring.
Hope this helps.