2006 summit 800 x

OVERKILL 19 · 01-10-2007, 01:34 PM

Has anyone put crankshop single/mbrp can on their REV .I have the can ,but thinking about a pipe? I put Skidoo tunnel stiffeners and a-arm protectors on the other day. A few home maid bends to the a-arm brackets and the fit good now. The stiffeners on the other hand were not fun, 4 stripped allen head bolts and one track/cross shaft bolt broke ,and alot of cursing they seem to have tightened every thing up quit a bit. Have not tried yet, Revy bound Jan 22. Has anyone tried the Specialty Sleds stiffner it looks like it would be a easier install?

Summitric · 01-10-2007, 03:43 PM

I Have Put A Mbrp Can On My '06 1000rt, And Sounds Almost Stock At Idle, But Under Load, Has Great Sound(quite Loud Too).... I Like It And Saves About 20 - 30 Lbs, I Suspect. Can't Help You On The Tunnel Stiffeners, But I Think I'm Gonna Look At The "specialty Sled" Stiffeners.

sledbunnyracing · 01-10-2007, 03:58 PM

In my opinion the MBRP can is too loud. As soon as you punch it the sound becomes too much. In the mountains it's OK but locally, I would not suggest it.
Here is a clip for you to here it for youself.

http://www.snowandmud.com/coppermine...album=31&pos=0

OVERKILL 19 · 01-10-2007, 05:39 PM

I have the mbrp can already ,so I'am going to keep it .I agree it is alittle loud but I think it is quiter than my last sled.ZX 800 crankshop single & can,with trail port. She barked pretty good.I was curiours if anyone had run this pipe on a REV .Good ,bad, re-jet or not. As for the OEM stiffeners they work great but you have to drop your back end of your track down to remove/drill out the toe hold brackets/rivets .You can see one the black allan head bolts on the bottom of your tunnel by the toe hold,the other is up inside the tunnel ,they are steel with locktite into aluminium threads "not cool" once all back togeather you cant even tell you have stiffeners which to me is why I went with them. The other style that are on top of the foot rest would be way way easier to install. My 2 cents

snochuk · 01-10-2007, 06:39 PM

I have cranksop single/specialty can on an 06/800/X. Supposed to gain about 8HP and loose 14.5#. Did not rejet as plugs don't show a need for jetting however throttle response seems extra crisp....2500KM and it hasn't blown so I'm not changing anything. Definatly a sweet sound when front end comes out of the snow but also to loud for populated areas. Ceramic coating seems to be breaking down 8" past y-pipe, could be runnig a little warm.

Sledderglen · 01-10-2007, 08:55 PM

My vote to loud stay in the mountains

OVERKILL 19 · 01-10-2007, 09:42 PM

Thanks I was pondering Ceramic coating .Are you running stock panels/hood .A fella I was sledding with in GP burnt little slots in the side panels/hood to let the heat out, he said it was the only way to go but I did'nt care for the way it looked. P.S have ya changed your clutch at all? thanks for the tips.

snochuk · 01-10-2007, 10:35 PM

Panels are all stock,clutch is set on #3 and was pulling 7900RPM at about 8500'. I think the pipe may have tarnished just from use as one guy in group has a Dynoport that has tarnished about the same....not rusting like a painted pipe ,just tarnished. I don't think heat under hood is an issue but aftermarket vent kits will deffinatly lower temps.

OVERKILL 19 · 01-10-2007, 11:21 PM

Guess I need to make a tripp to the store,thanks all for the info

OVERKILL 19 · 01-11-2007, 01:09 PM

P.S SUMMITRIC if you are looking at different tunnel stiffeners , I will gladly take some pics of mine and send them to ya ,if that helps.

Summitric · 01-11-2007, 02:28 PM

If You Could Take Some Pics, That Would Be Great... You Could Try And Post Them Under This Section(i'm Sure There Would Be Some Interest In It)... Thanks Man, I Really Appreciate It.

01-10-2007, 01:34 PM	#1 (permalink)
OVERKILL 19 Member Join Date: Dec 2006 Location: Red Deer Posts: 1,119 Casino Cash: $1012209 Thanks: 251 Thanked 324 Times in 231 Posts Mood	2006 summit 800 x Has anyone put crankshop single/mbrp can on their REV .I have the can ,but thinking about a pipe? I put Skidoo tunnel stiffeners and a-arm protectors on the other day. A few home maid bends to the a-arm brackets and the fit good now. The stiffeners on the other hand were not fun, 4 stripped allen head bolts and one track/cross shaft bolt broke ,and alot of cursing they seem to have tightened every thing up quit a bit. Have not tried yet, Revy bound Jan 22. Has anyone tried the Specialty Sleds stiffner it looks like it would be a easier install?

01-10-2007, 03:43 PM	#2 (permalink)
Summitric Senor Moderator Join Date: Oct 2006 Location: Edmonton/Sherwood Park Posts: 16,629 Casino Cash: $1155960 Thanks: 8,405 Thanked 7,032 Times in 4,039 Posts Mood	Mbrp Can I Have Put A Mbrp Can On My '06 1000rt, And Sounds Almost Stock At Idle, But Under Load, Has Great Sound(quite Loud Too).... I Like It And Saves About 20 - 30 Lbs, I Suspect. Can't Help You On The Tunnel Stiffeners, But I Think I'm Gonna Look At The "specialty Sled" Stiffeners. __________________ SUMMITRIC www.sledbunnyracing.com 2006 Summit 1000RT Highmark 162"(THUMPER) 2004 Summit 800X 151"(BLACKWRABBIT) 1998 Yamaha 600 Grizzly Member of Team Slim ALBERT BECK - HIGHMARKING IN THE HEAVENS - REST IN PEACE AUTHORIZED OFFICIAL GEARHEAD!

01-10-2007, 03:58 PM	#3 (permalink)
sledbunnyracing Administrator Join Date: Oct 2006 Location: Edmonton Alberta, Canada Posts: 14,126 Casino Cash: $7356120 Thanks: 857 Thanked 9,198 Times in 4,241 Posts	MBRP Can Loud In my opinion the MBRP can is too loud. As soon as you punch it the sound becomes too much. In the mountains it's OK but locally, I would not suggest it. Here is a clip for you to here it for youself. http://www.snowandmud.com/coppermine...album=31&pos=0 __________________ www.sledbunnyracing.com 07 Rev 800 05 Rev 800 01 RMK 800 Albert "LOST" Beck - Rest In Peace Member of Team Slim

01-10-2007, 08:55 PM	#6 (permalink)
Sledderglen Moderator Join Date: Nov 2006 Location: The Trailerhood Posts: 2,316 Casino Cash: $1512364 Thanks: 2,346 Thanked 1,028 Times in 562 Posts Mood	Way to louds My vote to loud stay in the mountains

01-11-2007, 02:28 PM	#11 (permalink)
Summitric Senor Moderator Join Date: Oct 2006 Location: Edmonton/Sherwood Park Posts: 16,629 Casino Cash: $1155960 Thanks: 8,405 Thanked 7,032 Times in 4,039 Posts Mood	Overkill 19 If You Could Take Some Pics, That Would Be Great... You Could Try And Post Them Under This Section(i'm Sure There Would Be Some Interest In It)... Thanks Man, I Really Appreciate It. __________________ SUMMITRIC www.sledbunnyracing.com 2006 Summit 1000RT Highmark 162"(THUMPER) 2004 Summit 800X 151"(BLACKWRABBIT) 1998 Yamaha 600 Grizzly Member of Team Slim ALBERT BECK - HIGHMARKING IN THE HEAVENS - REST IN PEACE AUTHORIZED OFFICIAL GEARHEAD!

Sponsored Links, Plese click on Banner to View there Website

01-10-2007, 05:39 PM	#4 (permalink)
OVERKILL 19 Member Join Date: Dec 2006 Location: Red Deer Posts: 1,119 Casino Cash: $1012209 Thanks: 251 Thanked 324 Times in 231 Posts Mood	I have the mbrp can already ,so I'am going to keep it .I agree it is alittle loud but I think it is quiter than my last sled.ZX 800 crankshop single & can,with trail port. She barked pretty good.I was curiours if anyone had run this pipe on a REV .Good ,bad, re-jet or not. As for the OEM stiffeners they work great but you have to drop your back end of your track down to remove/drill out the toe hold brackets/rivets .You can see one the black allan head bolts on the bottom of your tunnel by the toe hold,the other is up inside the tunnel ,they are steel with locktite into aluminium threads "not cool" once all back togeather you cant even tell you have stiffeners which to me is why I went with them. The other style that are on top of the foot rest would be way way easier to install. My 2 cents

01-10-2007, 06:39 PM	#5 (permalink)
snochuk Member Join Date: Nov 2006 Location: Edmonton Posts: 892 Casino Cash: $688056 Thanks: 330 Thanked 429 Times in 231 Posts	I have cranksop single/specialty can on an 06/800/X. Supposed to gain about 8HP and loose 14.5#. Did not rejet as plugs don't show a need for jetting however throttle response seems extra crisp....2500KM and it hasn't blown so I'm not changing anything. Definatly a sweet sound when front end comes out of the snow but also to loud for populated areas. Ceramic coating seems to be breaking down 8" past y-pipe, could be runnig a little warm.

01-10-2007, 09:42 PM	#7 (permalink)
OVERKILL 19 Member Join Date: Dec 2006 Location: Red Deer Posts: 1,119 Casino Cash: $1012209 Thanks: 251 Thanked 324 Times in 231 Posts Mood	Thanks I was pondering Ceramic coating .Are you running stock panels/hood .A fella I was sledding with in GP burnt little slots in the side panels/hood to let the heat out, he said it was the only way to go but I did'nt care for the way it looked. P.S have ya changed your clutch at all? thanks for the tips.

01-10-2007, 10:35 PM	#8 (permalink)
snochuk Member Join Date: Nov 2006 Location: Edmonton Posts: 892 Casino Cash: $688056 Thanks: 330 Thanked 429 Times in 231 Posts	Panels are all stock,clutch is set on #3 and was pulling 7900RPM at about 8500'. I think the pipe may have tarnished just from use as one guy in group has a Dynoport that has tarnished about the same....not rusting like a painted pipe ,just tarnished. I don't think heat under hood is an issue but aftermarket vent kits will deffinatly lower temps.

01-10-2007, 11:21 PM	#9 (permalink)
OVERKILL 19 Member Join Date: Dec 2006 Location: Red Deer Posts: 1,119 Casino Cash: $1012209 Thanks: 251 Thanked 324 Times in 231 Posts Mood	Guess I need to make a tripp to the store,thanks all for the info

01-11-2007, 01:09 PM	#10 (permalink)
OVERKILL 19 Member Join Date: Dec 2006 Location: Red Deer Posts: 1,119 Casino Cash: $1012209 Thanks: 251 Thanked 324 Times in 231 Posts Mood	P.S SUMMITRIC if you are looking at different tunnel stiffeners , I will gladly take some pics of mine and send them to ya ,if that helps.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode