Reverse Rev Limiter

farmboy020 · 04-21-2009, 09:09 PM

Hey guys

i am trying to find a way to bypass my reverse rev limiter. I have found a couple ways but am still a little bit confused. I do not want to buy the kit off ebay because i think u will just be paying for the direction of how to do it. Does any one now how to do it. It is a 2007 yamaha grizzly/kodiak 450. thanks

Wise Mechanical · 04-22-2009, 06:35 PM

Stop by young grasshopper my quads ripped apart right now and its easy to see and do!

farmboy020 · 04-23-2009, 03:34 PM

ya for surre will mr. wise. Cant wait for may long

bikerboy4ever · 05-14-2009, 05:49 PM

Any chance you can post how to do it. Its a real pain when your in a mud hole and all you have to do is rev, but the limiter stops you from doing it!

farmboy020 · 05-16-2009, 11:25 PM

well i have not goten to it yet wise has been really busy seeings how seeding has hit so hes been working lots. However i did find instructions on one forum and it said all you had to do it pull put your cdi box under the seat and in the middle plug there is a bunch of wires. all you have to do is splice into teh green/white one and ground it to the battery. hope this works or helps. Good luck

ttpowersports · 05-18-2009, 10:00 PM

Ok my computer skills are pretty limited and i have step by step on a grizz 660 which would be much the same. if you want to pm me your fax number i can sent you a copy

T

Murminator · 05-18-2009, 10:50 PM

Originally Posted by ttpowersports

Ok my computer skills are pretty limited and i have step by step on a grizz 660 which would be much the same. if you want to pm me your fax number i can sent you a copy

T

This is easier

02 - 03 Reverse OR

mybigredronda · 05-22-2009, 08:42 PM

all you have to do is ground the wire to the frame light wont turn on but ull have lots of power going in reverse

Wise Mechanical · 05-23-2009, 07:17 PM

there are 4 pins that stick out on the top of the trans just below your airbox and all you have to do is ground the farthest right pin i put mine on a switch just for new riders and kids.

farmboy020 · 05-23-2009, 08:05 PM

wise is that farthest right sitting on it or what

Wise Mechanical · 05-24-2009, 11:28 AM

Its always sitting on the seat my friend, dont unhook it from the pin, just attatch a jumper wire and put it to ground

farmboy020 · 05-24-2009, 08:43 PM

sweet thanks wise my quad is apart for a a while got a couple repairs and a couple mods to do so should give me enough time to snorkel it and do the reverse override. lol

bikerboy4ever · 05-30-2009, 01:50 PM

Just finished doing this mod. I hooked it up to the override switch for the diff lock. Much cleaner than adding a switch. Works great!! I highly recomend this for anyone who likes to hit the big mud holes and finds themself stuck because you cant reverse out.

leonard · 05-30-2009, 03:18 PM

whats this word stuck that you keep mentioning..

bikerboy4ever · 05-30-2009, 09:03 PM

Momentarily not moving. Its happened once and that was enough that i had to do this mod.

04-21-2009, 09:09 PM	#1 (permalink)
farmboy020 Member Join Date: Feb 2009 Location: keoma AB. Posts: 58 Casino Cash: $87600 Thanks: 2 Thanked 4 Times in 4 Posts	Reverse Rev Limiter Hey guys i am trying to find a way to bypass my reverse rev limiter. I have found a couple ways but am still a little bit confused. I do not want to buy the kit off ebay because i think u will just be paying for the direction of how to do it. Does any one now how to do it. It is a 2007 yamaha grizzly/kodiak 450. thanks

04-22-2009, 06:35 PM	#2 (permalink)
Wise Mechanical Member Join Date: Oct 2008 Location: Irricana, AB Posts: 57 Casino Cash: $113240 Thanks: 23 Thanked 11 Times in 10 Posts	Re: Reverse Rev Limiter Stop by young grasshopper my quads ripped apart right now and its easy to see and do! __________________ 07 Kodiak 450, 26" Mudlights, Snorkels 02 Suzuki LTZ 400, HMF, Nerfs, Maxxi Rzr2s 99 GMC 2500 6litre, STF Sled Deck 2000 Dodge 2500 Cummins 2007 Haulmark 20ft enclosed cargo 1994 Dutchman Duck, 24 ft Holiday Trailer

04-23-2009, 03:34 PM	#3 (permalink)
farmboy020 Member Join Date: Feb 2009 Location: keoma AB. Posts: 58 Casino Cash: $87600 Thanks: 2 Thanked 4 Times in 4 Posts	Re: Reverse Rev Limiter ya for surre will mr. wise. Cant wait for may long

05-14-2009, 05:49 PM	#4 (permalink)
bikerboy4ever Member Join Date: Feb 2009 Location: Fort McMurray,AB Posts: 17 Casino Cash: $8601 Thanks: 8 Thanked 0 Times in 0 Posts	Re: Reverse Rev Limiter Any chance you can post how to do it. Its a real pain when your in a mud hole and all you have to do is rev, but the limiter stops you from doing it!

05-16-2009, 11:25 PM	#5 (permalink)
farmboy020 Member Join Date: Feb 2009 Location: keoma AB. Posts: 58 Casino Cash: $87600 Thanks: 2 Thanked 4 Times in 4 Posts	Re: Reverse Rev Limiter well i have not goten to it yet wise has been really busy seeings how seeding has hit so hes been working lots. However i did find instructions on one forum and it said all you had to do it pull put your cdi box under the seat and in the middle plug there is a bunch of wires. all you have to do is splice into teh green/white one and ground it to the battery. hope this works or helps. Good luck

Sponsored Links, Plese click on Banner to View there Website

05-18-2009, 10:00 PM	#6 (permalink)
ttpowersports Supporting Vendors Join Date: Dec 2008 Location: bonnyville alberta Posts: 993 Casino Cash: $924540 Thanks: 293 Thanked 468 Times in 279 Posts	Re: Reverse Rev Limiter Ok my computer skills are pretty limited and i have step by step on a grizz 660 which would be much the same. if you want to pm me your fax number i can sent you a copy T __________________ the only bad ride is the one you missed!!!! Visit Us Online At: http://www.ttpowersports.com

05-18-2009, 10:50 PM	#7 (permalink)
Murminator Moderator Join Date: May 2007 Location: NE Edmonton Posts: 2,664 Casino Cash: $1816865 Thanks: 443 Thanked 1,008 Times in 603 Posts	Re: Reverse Rev Limiter Originally Posted by ttpowersports Ok my computer skills are pretty limited and i have step by step on a grizz 660 which would be much the same. if you want to pm me your fax number i can sent you a copy T This is easier 02 - 03 Reverse OR __________________ Murray If my wife asks.....It cost about 20 bucks Don't be offended......I hate everyone equally Member of Team Slim Remember ride it.....don't worship it

05-22-2009, 08:42 PM	#8 (permalink)
mybigredronda Member Join Date: Mar 2009 Location: valleyview Posts: 3 Casino Cash: $7500 Thanks: 0 Thanked 0 Times in 0 Posts	Re: Reverse Rev Limiter all you have to do is ground the wire to the frame light wont turn on but ull have lots of power going in reverse

05-23-2009, 07:17 PM	#9 (permalink)
Wise Mechanical Member Join Date: Oct 2008 Location: Irricana, AB Posts: 57 Casino Cash: $113240 Thanks: 23 Thanked 11 Times in 10 Posts	Re: Reverse Rev Limiter there are 4 pins that stick out on the top of the trans just below your airbox and all you have to do is ground the farthest right pin i put mine on a switch just for new riders and kids. __________________ 07 Kodiak 450, 26" Mudlights, Snorkels 02 Suzuki LTZ 400, HMF, Nerfs, Maxxi Rzr2s 99 GMC 2500 6litre, STF Sled Deck 2000 Dodge 2500 Cummins 2007 Haulmark 20ft enclosed cargo 1994 Dutchman Duck, 24 ft Holiday Trailer

05-23-2009, 08:05 PM	#10 (permalink)
farmboy020 Member Join Date: Feb 2009 Location: keoma AB. Posts: 58 Casino Cash: $87600 Thanks: 2 Thanked 4 Times in 4 Posts	Re: Reverse Rev Limiter wise is that farthest right sitting on it or what

05-24-2009, 11:28 AM	#11 (permalink)
Wise Mechanical Member Join Date: Oct 2008 Location: Irricana, AB Posts: 57 Casino Cash: $113240 Thanks: 23 Thanked 11 Times in 10 Posts	Re: Reverse Rev Limiter Its always sitting on the seat my friend, dont unhook it from the pin, just attatch a jumper wire and put it to ground __________________ 07 Kodiak 450, 26" Mudlights, Snorkels 02 Suzuki LTZ 400, HMF, Nerfs, Maxxi Rzr2s 99 GMC 2500 6litre, STF Sled Deck 2000 Dodge 2500 Cummins 2007 Haulmark 20ft enclosed cargo 1994 Dutchman Duck, 24 ft Holiday Trailer

05-24-2009, 08:43 PM	#12 (permalink)
farmboy020 Member Join Date: Feb 2009 Location: keoma AB. Posts: 58 Casino Cash: $87600 Thanks: 2 Thanked 4 Times in 4 Posts	Re: Reverse Rev Limiter sweet thanks wise my quad is apart for a a while got a couple repairs and a couple mods to do so should give me enough time to snorkel it and do the reverse override. lol

05-30-2009, 01:50 PM	#13 (permalink)
bikerboy4ever Member Join Date: Feb 2009 Location: Fort McMurray,AB Posts: 17 Casino Cash: $8601 Thanks: 8 Thanked 0 Times in 0 Posts	Re: Reverse Rev Limiter Just finished doing this mod. I hooked it up to the override switch for the diff lock. Much cleaner than adding a switch. Works great!! I highly recomend this for anyone who likes to hit the big mud holes and finds themself stuck because you cant reverse out.

05-30-2009, 03:18 PM	#14 (permalink)
leonard Member Join Date: Jun 2007 Location: Whitecourt Alberta Canada Posts: 402 Casino Cash: $330702 Thanks: 3 Thanked 104 Times in 74 Posts	Re: Reverse Rev Limiter whats this word stuck that you keep mentioning.. __________________ 07 660 Grizz "Green"All Yamaha Alum Skid plating. ITP 6 Rims -27" BI /TRI CLAW MAGNUMS WhiteBrothers,E-series-K&N+DynoJet Fully Snorkeled \| HL Extreme Clutch kit HL Rear Springs - Stock Rears relocated to Front.\|Rear HubFlip 686 11:1 "Weiseco" & Mudbuster Cam w/ All Raptor valve spings

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
limiter strap	powerteker	Suspension, Track & Ski Upgrades	42	01-05-2010 11:24 AM
Rev Limiter	bowhunter	THE MUD PIT CHAT	6	04-13-2009 09:21 PM
Limiter Strap	shoppingcart111	Suspension, Track & Ski Upgrades	12	02-01-2009 04:24 PM
07 king quad 450 reverse limiter	crow	ATV & DIRT BIKE PERFORMANCE and MODIFICATION GARAGE	1	04-05-2008 09:19 PM
660 grizzly speed limiter wiring	keith660	ATV & DIRT BIKE PERFORMANCE and MODIFICATION GARAGE	14	01-03-2008 08:15 AM

05-30-2009, 09:03 PM	#15 (permalink)
bikerboy4ever Member Join Date: Feb 2009 Location: Fort McMurray,AB Posts: 17 Casino Cash: $8601 Thanks: 8 Thanked 0 Times in 0 Posts	Re: Reverse Rev Limiter Momentarily not moving. Its happened once and that was enough that i had to do this mod.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode