Sled mods.

Sled mods. · 01-07-2009, 10:57 AM

I just wanted to let people know that us a spindrift powersports are availble to help people with tuning issues of there mod sleds.. This way if you come out and your sled isn't working properly we'll do all that we can to get it working right for you so you are able to have a good weekend riding.. We also have had people organize it so that they come down a day ealy and then we install stuff and then they go ride the next day, some people are also riding for the weekend then dropping there sled off and coming back in 1-2weeks for there next ride and pick-up sled modded out ready to go..

swabby · 01-07-2009, 07:43 PM

hey there i screwed up my a arms on my 09 m8 last week and i wanna replace with aftermarket what do yu sell or recomend thx

glengine · 01-08-2009, 12:05 AM

I'd recommend holz as they are strong and also a bit lighter.. We are currently working at getting set-up with holz.. I'll see tomorrow what i can do for yah.

0neoldfart · 01-09-2009, 05:40 PM

Hey Glen.

Thanks again for fixing the wife's M8 on such short notice. Incidentally, did you find out anything more about the KMOD suspension for my M1000? (Ithink it was KMOD)... Cost, ride, weight transfer, etc? Thanks.
Karl

glengine · 01-10-2009, 03:07 AM

Workin on that for yah still karl..

swabby · 01-10-2009, 06:22 PM

is the holz 41' kit going to widen the front end on my m8?

swabby · 01-10-2009, 07:06 PM

hey Glengine can you put me in contact with someone from holtz ive been on there site and canot find any contact or tech support info?

glengine · 01-10-2009, 10:39 PM

Originally Posted by swabby

hey Glengine can you put me in contact with someone from holtz ive been on there site and canot find any contact or tech support info?

Right now your ski stance should be able to adjusted from like 39-41".. What info are you looking to find out from them about the arms? I have installed a few sets of them.

swabby · 01-10-2009, 11:43 PM

i was just wondering if the arms will fit without needing to buy spindles or any extras and if these were going to widen up the front end as i realy dont want a wide front end ,the ski stance is adjustable but any idea what they set them at from stock?
thx alot for the help ,from what ive seen you are better than any dealership and when sleddin is over for the season you will definitley be doing my m8 mods
1 more thing if i go with holtz and i end up dingin up say 1 a arm is it possible to order single replacements or the hole kit only,the reason i ask is i have a colection of twisted and broken a arm trophies hangin in my garage the track record isnt good to date and unless the holtz are made from 1'solid stock they will probly end up as a trophy sometime lol....

glengine · 01-11-2009, 02:26 AM

Originally Posted by swabby

i was just wondering if the arms will fit without needing to buy spindles or any extras and if these were going to widen up the front end as i realy dont want a wide front end ,the ski stance is adjustable but any idea what they set them at from stock?
thx alot for the help ,from what ive seen you are better than any dealership and when sleddin is over for the season you will definitley be doing my m8 mods
1 more thing if i go with holtz and i end up dingin up say 1 a arm is it possible to order single replacements or the hole kit only,the reason i ask is i have a colection of twisted and broken a arm trophies hangin in my garage the track record isnt good to date and unless the holtz are made from 1'solid stock they will probly end up as a trophy sometime lol....

Thanks.. Yah you can get single arms.. They are the same width mainly as stock.. They are tuher than the stock arms.. Once we are set-up as a dealer we will have them in stock, as set's and individually..

01-07-2009, 10:57 AM	#1 (permalink)
Sled mods. glengine Spindrift Motorsports Join Date: Jan 2008 Location: Mcbride, BC. Posts: 1,835 Thanks: 578 Thanked 1,002 Times in 570 Posts glengine 01-07-2009, 10:57 AM Rating: () I just wanted to let people know that us a spindrift powersports are availble to help people with tuning issues of there mod sleds.. This way if you come out and your sled isn't working properly we'll do all that we can to get it working right for you so you are able to have a good weekend riding.. We also have had people organize it so that they come down a day ealy and then we install stuff and then they go ride the next day, some people are also riding for the weekend then dropping there sled off and coming back in 1-2weeks for there next ride and pick-up sled modded out ready to go.. __________________ SPINDRIFT POWERSPORTS LTD. is open for business, 1098 N.E frontage rd. (right beside police station)..McBride, BC. (250)569-0070. Cell# (250)569-7213 We are open 8am til 5pm Tuesday to staurday... After hours just give me a call on cell and i can come open up the shop to help you out.. we are dealers for KLIM, SNOW AND MUD GEAR, VP FUEL, RK TEK, BACK COUNTRY ACCESS AVY GEAR, THUNDERSTRUCK GEAR, SUMMER SUCKS Have NOS, and more stuff in the works for more good stuff in the very near future. Our website www.spindriftpowersports.com
Views: 528

01-07-2009, 07:43 PM	#2 (permalink)
swabby Member Join Date: Oct 2008 Location: alberta Posts: 165 Casino Cash: $223020 Thanks: 80 Thanked 37 Times in 32 Posts No Classified Ratings	Re: Sled mods. hey there i screwed up my a arms on my 09 m8 last week and i wanna replace with aftermarket what do yu sell or recomend thx

01-08-2009, 12:05 AM	#3 (permalink)
glengine Spindrift Motorsports Join Date: Jan 2008 Location: Mcbride, BC. Posts: 1,835 Casino Cash: $576450 Thanks: 578 Thanked 1,002 Times in 570 Posts No Classified Ratings	Re: Sled mods. I'd recommend holz as they are strong and also a bit lighter.. We are currently working at getting set-up with holz.. I'll see tomorrow what i can do for yah. __________________ SPINDRIFT POWERSPORTS LTD. is open for business, 1098 N.E frontage rd. (right beside police station)..McBride, BC. (250)569-0070. Cell# (250)569-7213 We are open 8am til 5pm Tuesday to staurday... After hours just give me a call on cell and i can come open up the shop to help you out.. we are dealers for KLIM, SNOW AND MUD GEAR, VP FUEL, RK TEK, BACK COUNTRY ACCESS AVY GEAR, THUNDERSTRUCK GEAR, SUMMER SUCKS Have NOS, and more stuff in the works for more good stuff in the very near future. Our website www.spindriftpowersports.com

01-09-2009, 05:40 PM	#4 (permalink)
0neoldfart Member Join Date: Nov 2008 Location: Thorsby Posts: 30 Casino Cash: $113600 Thanks: 0 Thanked 10 Times in 10 Posts No Classified Ratings	Re: Sled mods. Hey Glen. Thanks again for fixing the wife's M8 on such short notice. Incidentally, did you find out anything more about the KMOD suspension for my M1000? (Ithink it was KMOD)... Cost, ride, weight transfer, etc? Thanks. Karl

01-10-2009, 03:07 AM	#5 (permalink)
glengine Spindrift Motorsports Join Date: Jan 2008 Location: Mcbride, BC. Posts: 1,835 Casino Cash: $576450 Thanks: 578 Thanked 1,002 Times in 570 Posts No Classified Ratings	Re: Sled mods. Workin on that for yah still karl.. __________________ SPINDRIFT POWERSPORTS LTD. is open for business, 1098 N.E frontage rd. (right beside police station)..McBride, BC. (250)569-0070. Cell# (250)569-7213 We are open 8am til 5pm Tuesday to staurday... After hours just give me a call on cell and i can come open up the shop to help you out.. we are dealers for KLIM, SNOW AND MUD GEAR, VP FUEL, RK TEK, BACK COUNTRY ACCESS AVY GEAR, THUNDERSTRUCK GEAR, SUMMER SUCKS Have NOS, and more stuff in the works for more good stuff in the very near future. Our website www.spindriftpowersports.com

Sponsored Links, Plese click on Banner to View there Website

01-10-2009, 06:22 PM	#6 (permalink)
swabby Member Join Date: Oct 2008 Location: alberta Posts: 165 Casino Cash: $223020 Thanks: 80 Thanked 37 Times in 32 Posts No Classified Ratings	Re: Sled mods. is the holz 41' kit going to widen the front end on my m8?

01-10-2009, 07:06 PM	#7 (permalink)
swabby Member Join Date: Oct 2008 Location: alberta Posts: 165 Casino Cash: $223020 Thanks: 80 Thanked 37 Times in 32 Posts No Classified Ratings	Re: Sled mods. hey Glengine can you put me in contact with someone from holtz ive been on there site and canot find any contact or tech support info?

01-10-2009, 10:39 PM	#8 (permalink)
glengine Spindrift Motorsports Join Date: Jan 2008 Location: Mcbride, BC. Posts: 1,835 Casino Cash: $576450 Thanks: 578 Thanked 1,002 Times in 570 Posts No Classified Ratings	Re: Sled mods. Originally Posted by swabby hey Glengine can you put me in contact with someone from holtz ive been on there site and canot find any contact or tech support info? Right now your ski stance should be able to adjusted from like 39-41".. What info are you looking to find out from them about the arms? I have installed a few sets of them. __________________ SPINDRIFT POWERSPORTS LTD. is open for business, 1098 N.E frontage rd. (right beside police station)..McBride, BC. (250)569-0070. Cell# (250)569-7213 We are open 8am til 5pm Tuesday to staurday... After hours just give me a call on cell and i can come open up the shop to help you out.. we are dealers for KLIM, SNOW AND MUD GEAR, VP FUEL, RK TEK, BACK COUNTRY ACCESS AVY GEAR, THUNDERSTRUCK GEAR, SUMMER SUCKS Have NOS, and more stuff in the works for more good stuff in the very near future. Our website www.spindriftpowersports.com

01-10-2009, 11:43 PM	#9 (permalink)
swabby Member Join Date: Oct 2008 Location: alberta Posts: 165 Casino Cash: $223020 Thanks: 80 Thanked 37 Times in 32 Posts No Classified Ratings	Re: Sled mods. i was just wondering if the arms will fit without needing to buy spindles or any extras and if these were going to widen up the front end as i realy dont want a wide front end ,the ski stance is adjustable but any idea what they set them at from stock? thx alot for the help ,from what ive seen you are better than any dealership and when sleddin is over for the season you will definitley be doing my m8 mods 1 more thing if i go with holtz and i end up dingin up say 1 a arm is it possible to order single replacements or the hole kit only,the reason i ask is i have a colection of twisted and broken a arm trophies hangin in my garage the track record isnt good to date and unless the holtz are made from 1'solid stock they will probly end up as a trophy sometime lol....

01-11-2009, 02:26 AM	#10 (permalink)
glengine Spindrift Motorsports Join Date: Jan 2008 Location: Mcbride, BC. Posts: 1,835 Casino Cash: $576450 Thanks: 578 Thanked 1,002 Times in 570 Posts No Classified Ratings	Re: Sled mods. Originally Posted by swabby i was just wondering if the arms will fit without needing to buy spindles or any extras and if these were going to widen up the front end as i realy dont want a wide front end ,the ski stance is adjustable but any idea what they set them at from stock? thx alot for the help ,from what ive seen you are better than any dealership and when sleddin is over for the season you will definitley be doing my m8 mods 1 more thing if i go with holtz and i end up dingin up say 1 a arm is it possible to order single replacements or the hole kit only,the reason i ask is i have a colection of twisted and broken a arm trophies hangin in my garage the track record isnt good to date and unless the holtz are made from 1'solid stock they will probly end up as a trophy sometime lol.... Thanks.. Yah you can get single arms.. They are the same width mainly as stock.. They are tuher than the stock arms.. Once we are set-up as a dealer we will have them in stock, as set's and individually.. __________________ SPINDRIFT POWERSPORTS LTD. is open for business, 1098 N.E frontage rd. (right beside police station)..McBride, BC. (250)569-0070. Cell# (250)569-7213 We are open 8am til 5pm Tuesday to staurday... After hours just give me a call on cell and i can come open up the shop to help you out.. we are dealers for KLIM, SNOW AND MUD GEAR, VP FUEL, RK TEK, BACK COUNTRY ACCESS AVY GEAR, THUNDERSTRUCK GEAR, SUMMER SUCKS Have NOS, and more stuff in the works for more good stuff in the very near future. Our website www.spindriftpowersports.com

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
m8 mods	scrapmaster	ARCTIC CAT	28	03-08-2009 03:59 PM
fav mods	popoman 500	SPORT ATV'S	2	12-25-2008 12:18 PM
Mods on a kids sled	gotboost	SNOWMOBILE CHAT	0	11-22-2008 05:17 PM
For the Mods	tekim	JUST ABOUT ANYTHING GOES	12	09-29-2008 12:54 PM
What sled mods are you doing?	rknight111	SNOWMOBILE CHAT	74	07-24-2008 09:21 PM