measuring points

scrapmaster · 03-22-2009, 02:14 PM

hey all just wondering if anyone can provide some measuring points, tryin to figure out if i got bent a arms or bulkhead? i know shes had some pretty aggresive endos and rolls on harpack also hit the odd tree.. going from front spindles to rear suspension mount on the tunnel its out about 1/2" side to side, also how much of an improvment would a float set up make over the standard?

blastoff · 03-26-2009, 09:23 AM

Could be in the bulkhead, if you have access to a tram gauge works the best. If no visible paint flaking on the control arms it could be the bulkhead. Some times these things puzzle a guy but it takes time too see the damage walk away for a while then have another look.

psycoticmudder · 03-26-2009, 06:07 PM

measure back from a arm points to rivet on tunnel at same points on tunnel on each side and compare

03-22-2009, 02:14 PM	#1 (permalink)
scrapmaster Member Join Date: Oct 2008 Location: Edson Posts: 90 Casino Cash: $152300 Thanks: 34 Thanked 25 Times in 19 Posts No Classified Ratings Mood	measuring points hey all just wondering if anyone can provide some measuring points, tryin to figure out if i got bent a arms or bulkhead? i know shes had some pretty aggresive endos and rolls on harpack also hit the odd tree.. going from front spindles to rear suspension mount on the tunnel its out about 1/2" side to side, also how much of an improvment would a float set up make over the standard?

03-26-2009, 09:23 AM	#2 (permalink)
blastoff Member Join Date: Feb 2007 Location: Alberta Posts: 559 Casino Cash: $534220 Thanks: 74 Thanked 171 Times in 122 Posts No Classified Ratings	Re: measuring points Could be in the bulkhead, if you have access to a tram gauge works the best. If no visible paint flaking on the control arms it could be the bulkhead. Some times these things puzzle a guy but it takes time too see the damage walk away for a while then have another look.

03-26-2009, 06:07 PM	#3 (permalink)
psycoticmudder Member Join Date: Jan 2008 Location: bonnyville Posts: 272 Casino Cash: $264350 Thanks: 70 Thanked 35 Times in 33 Posts No Classified Ratings Mood	Re: measuring points measure back from a arm points to rivet on tunnel at same points on tunnel on each side and compare

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Measuring the length of a track	Calhoon	SNOWMOBILE CHAT	7	01-19-2009 03:49 PM
Avalanche points to read and remember...	Dobir	SNOWMOBILE CHAT	7	11-08-2008 10:07 AM
Tie Down Points	sumx54	SKIDOO	11	03-11-2008 01:56 AM

Sponsored Links, Plese click on Banner to View there Website