Originally Posted by murminator 
ok So I Blew A Cv Boot Last Weekend Got The New Boot Put It On Put It A Bunch In Amsoil Synthetic Grease Kevin Recomended Put It All Back Together Took It For A Spin And It Is Still Knocking And Poping On The One Side. Going Straight Is Fine And Turning With That Wheel Outwards Is Fine, When I Turn With That Wheel To The Inside Is When It Pops And Knocks Like It Is Binding Or Something.
Could I Have Maybe Not Put Enough Grease In?...i Put A Bunch In The Cup Then Installed Pumped Some Gease Into The Cage And Around The Balls Put It Back Together Pumped Somemore Grease On The Bottom Side On The Cage Installed The Boot.
Or Is The Cv Shot?... Everything Looked Normal Taking It Apart After I Got All The Skeg And Grass Out Of It. After I Cleaned It All Up Everything Seems To Look And Feel Normal
How Do You Know When It Is Shot?
Hey Murm.... You Can Actually Take A Pressure Washer To The C/v Joint And Clean It Out, Then Blow Dry And Repack With Lots Of Grease Before Putting The Boot Back On.... If You Didn't Clean It Out, Then Some Of The Old Dirt Could Be Causing The Noise, But More Than Likely The Joint Is Worn, Due To Muck Getting Into The Joint, And You Will Need To Replace The Joint Or Axle(whichever Is Cheaper).... Good Luck And Keep Us Informed!!!