LoginRegister
SnowandMud.com - Powered by vBulletin

Today's Posts
Results 1 to 2 of 2

Boon docker fuel programmer

Discuss Boon docker fuel programmer in the PERFORMANCE & MODIFICATION GARAGE forums; I installed a boon docker on my thundercat(atv) to add fuel for my pipe,snorkals and pistons. I also installed an ...


  1. #1
    Member atvmodster's Avatar
    Join Date
    Jan 2009
    Location
    St.Walburg
    Posts
    102
    Post Thanks / Like

    Boon docker fuel programmer

    I installed a boon docker on my thundercat(atv) to add fuel for my pipe,snorkals and pistons. I also installed an air fuel gauge to make tuning eaiser. My boon docker has a 2000,3000,4000,6000,8000 rpms ranges and each range has low,med,hi settings. So lets say at 2000rpm, would the medium adjustment be 2000 rpm and low be just below 2000 and high just above 2000? I dont really get how that works forsure. I know the low at 2000 rpm seems to be adjusting my air/fuel at idal. At 6000 and 8000 i did hear someone say that you will mainly only adjust the hi settings. Is this true? It also has a screen which is accel pump or somthing. It has three settings as well and i have no clue which these do. The reason i asked on the sled forum is because i know lots of modded sleds use the controlers. I know it is set up much the same as a sled one. I did notice that the 4000,6000 and 8000 seem to be pretty bang on on the air/fuel gauge. I am trying to keep the everything around 12.8 give or take a lil. Any help would be great!
    2010 Can-am Renegade X XC
    Fan override switch, snorkaled, SS212 wheels,28" silverbacks, Yellow hmf, RDC Gen 2 lift, Rhino axles w/axle spacers and a QSC mudpro clutch kit



  2. #2
    Member atvmodster's Avatar
    Join Date
    Jan 2009
    Location
    St.Walburg
    Posts
    102
    Post Thanks / Like

    Re: Boon docker fuel programmer

    Anyoe have any tips for tuning? I got it pretty close..
    2010 Can-am Renegade X XC
    Fan override switch, snorkaled, SS212 wheels,28" silverbacks, Yellow hmf, RDC Gen 2 lift, Rhino axles w/axle spacers and a QSC mudpro clutch kit

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


Search Engine Friendly URLs by vBSEO