Cam Am maverick steering issue

maxwell

Active VIP Member
Joined
Apr 25, 2007
Messages
19,836
Reaction score
41,655
Location
Sherwood Park, Alberta, Canada
convert.jpg



I have some play in my steering on my 2013 1000 XRS NO powersteering. its in the highlighted area on the photo. i havent pulled the boot yet but i assume there is some sort of ball joint likely under there that is worn out. I cant seem to get the boot off easily but will try again this weekend.

my problem is Brp doesnt offer parts for the steering assembely. Just the entire unit which is very expensive.

does anyone know of aftermarket alteratives to get this fixed up? or i see online there are some electric power steering upgrades for relatively cheap. is that worth it?

Thanks!
 

Bnorth

Active VIP Member
Joined
Dec 18, 2010
Messages
10,511
Reaction score
19,966
Location
Salmon Arm
That's the rack and pinion and not really rebuildable but if it's just the one side then it's likely not the rack but the inner tie rod end. Pull it out and have it matched by a competent parts guy.
 

tex78

Active VIP Member
Joined
Feb 5, 2010
Messages
17,505
Reaction score
16,873
Location
DA Moose B.C
View attachment 217044



I have some play in my steering on my 2013 1000 XRS NO powersteering. its in the highlighted area on the photo. i havent pulled the boot yet but i assume there is some sort of ball joint likely under there that is worn out. I cant seem to get the boot off easily but will try again this weekend.

my problem is Brp doesnt offer parts for the steering assembely. Just the entire unit which is very expensive.

does anyone know of aftermarket alteratives to get this fixed up? or i see online there are some electric power steering upgrades for relatively cheap. is that worth it?

Thanks!
That's the inner tie rod, and should be next to no play
That's the rack and pinion and not really rebuildable but if it's just the one side then it's likely not the rack but the inner tie rod end. Pull it out and have it matched by a competent parts guy.
Unfortunately Brando, that's old school, replacing inners

Pretty much all newer vehicles for example, inners are not available ( could take them apart tho) and have to change rack asmb...
Lots of issues with wrecking racks trying to get inners broke free
 

Bnorth

Active VIP Member
Joined
Dec 18, 2010
Messages
10,511
Reaction score
19,966
Location
Salmon Arm
That's the inner tie rod, and should be next to no play Unfortunately Brando, that's old school, replacing inners

Pretty much all newer vehicles for example, inners are not available ( could take them apart tho) and have to change rack asmb...
Lots of issues with wrecking racks trying to get inners broke free
whelp fawk
 

SamStorm

Active VIP Member
Joined
Jan 13, 2012
Messages
214
Reaction score
900
Location
Alberta
Could be the bushing in your rack. Stock are notorious for wearing out. Hell quite a few even have slop from the factory. Super Dave's motorcycle use to sell bushings that you could replace. Not sure if they still do or not. Could be worth checking into. They also sold inner tie rod ends as well. Aftermarket racks seem to be hit and miss. Some guys have luck, others not so much.
 

maxwell

Active VIP Member
Joined
Apr 25, 2007
Messages
19,836
Reaction score
41,655
Location
Sherwood Park, Alberta, Canada
Well looks like it’s the bushing in the rack. Just moving up and down enough to make the steering a bit sloppy. Maybe I’ll try out an electric assist rack. Cheaper than factory replacement
 
Top Bottom