2007 Outlander 800 ECM question

team-x

Active VIP Member
Joined
Sep 4, 2012
Messages
228
Reaction score
129
Location
Edmonton
Hey guy,

So my ECM is friend on my 07 Outlander 800 and I need a new one. I don't want to pay ~1300 for a new one so I'm looking for used ones. What years are interchangable? Do I need another 07 or can I find one from a different year and still be good?

Thanks
 

whoDEANie

Active VIP Member
Joined
Feb 8, 2009
Messages
4,633
Reaction score
8,479
Location
Edmonton
Generally, I look at part numbers first. I had a look at the part numbers for 2006-2008 and the part numbers for the ECM were different for each year. ...so it's probably not looking good.
 

KWIK RACING INC.

Active VIP Member
Joined
Nov 13, 2010
Messages
1,825
Reaction score
1,871
Location
calgary, alberta
send Kevin Barnes an Email at kevin@get-torqed.com..... he owns Get Torqed.... dyno, engine builder for can am... he is well known all over north america and europe.... is is one of the leading performance guys with can am since 2007.....he can get you a reflashed ecu that will work on your machine.. but you wont get one for peanuts... they are pricey even used... Kevin will be your best bet...

the ecu s are different year to year with the tuning that can am puts into them.. but you can get any year ecu reflashed to work with your machine so you wont need the factory one for an 07
 
Last edited:

team-x

Active VIP Member
Joined
Sep 4, 2012
Messages
228
Reaction score
129
Location
Edmonton
Thanks guys. I'll keep an eye out for a part out machine but if not I'll email him and see where to go from there.

I'm f winter ever shows up I can focus on sledding but last few years quad got more use than my sled...
 

DaveB

Active VIP Member
Joined
Sep 18, 2007
Messages
5,875
Reaction score
16,596
Location
Red Deer area
Thanks guys. I'll keep an eye out for a part out machine but if not I'll email him and see where to go from there.

I'm f winter ever shows up I can focus on sledding but last few years quad got more use than my sled...
Even if you find a used ECM you will need it re-programmed or it won't start. The key (DESS) is programmed to the ECM (and to the cluster I think).
 
Top Bottom