Time for a clutch rebuild on the quad. Having troubles in my area even finding a stock rebuild kit need to order piece by piece? What has everyone else done. Aftermarket clutch / clutch kit was it worth it? I basically just want to rebuild it stock or aftermarket don't matter. Or a aftermarket clutch it don't really matter. Red deer Alberta having a hard time finding anything here turplebros has nothing . Thanks
07 outlander 800 clutch kit or rebuild kit?
- Thread starter gdawg
- Start date
Was in the same boat as you, on my 07 renegade I went with CVTech primary and STM secondary now the rooster tails are twice as high when I'm stuck in the mud.
All kidding aside this is likely the biggest bang for the buck relatively speaking. If your into cruising over mudding you'll find way less need to shift into low till you get to the really steep/tough stuff. Of course low locks in tighter and quicker.
There are those with way more experience than I on clutching however short of Nos probably the biggest performance gain you'll get for the least amount of dough.
All kidding aside this is likely the biggest bang for the buck relatively speaking. If your into cruising over mudding you'll find way less need to shift into low till you get to the really steep/tough stuff. Of course low locks in tighter and quicker.
There are those with way more experience than I on clutching however short of Nos probably the biggest performance gain you'll get for the least amount of dough.
- Thread starter
- #3
whoDEANie
Active VIP Member
Did Rapid try to sell you on the new STM primary? I'm tempted to try it but the QSC/STM combo seems tried and true.
Actually no, Kevin had that one in stock. Timing was good somebody had ordered it for theirs and the deal fell through so I grabbed it....at a bit of a discount.
gdawg while you got er apart I'd change the inner/outer primary covers from the 8 bolt to the 13 bolt. Less prone to warping and leakage, if you haven't done so already.
gdawg while you got er apart I'd change the inner/outer primary covers from the 8 bolt to the 13 bolt. Less prone to warping and leakage, if you haven't done so already.
campingnut
Active VIP Member
I have a complete low KM primary out of my outlander I can sell
Great, now we can both be stuck in the same holes but with with 30% higher rooster tails....
kovs
Active VIP Member
Seems awful steep on price pretty sure ffun sells stm secondary for $700 &tax. Think they had deal on combos around 1500??
Sent from my iPhone using Tapatalk
doorfx
Active VIP Member
Wow I'll say !!
kovs
Active VIP Member
I stand corrected $1795 for qsc/stm combo
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
- Admin
- #13
Now convert to Canadian dollars
kovs
Active VIP Member
That is cdn, ffun is in Saskatoon sk
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
Similar threads
