impellers and wear rings

Cableguy

Active VIP Member
Joined
Dec 16, 2014
Messages
1,973
Reaction score
4,593
Location
Okanagan
200 sport jet
where are your guys finding the best price for replacements
 

neilsleder

Active VIP Member
Joined
Oct 18, 2009
Messages
9,618
Reaction score
16,999
Location
Leduc Alberta
I rebuild the impellers if you’re interested in that. If you got a stainless liner then I can do it. If you don’t I would highly recommend getting one. I don’t do the liner, the machinist I use is retired and I don’t want to get him to do that much work. But he does an awesome job of getting the impeller tight.
07716b88f73d44cba99821d26eb4e7fa.jpg

Here is a few I’ve done. It’s a fraction of the cost of replacement. If there’s not much rock damage I only charge $250 for a rebuild.
 

pfi572

Active VIP Member
Joined
Mar 10, 2010
Messages
6,063
Reaction score
15,236
Location
Grande Prairie
I rebuild the impellers if you’re interested in that. If you got a stainless liner then I can do it. If you don’t I would highly recommend getting one. I don’t do the liner, the machinist I use is retired and I don’t want to get him to do that much work. But he does an awesome job of getting the impeller tight. //uploads.tapatalk-cdn.com/20200610/07716b88f73d44cba99821d26eb4e7fa.jpg
Here is a few I’ve done. It’s a fraction of the cost of replacement. If there’s not much rock damage I only charge $250 for a rebuild.

Nicely done Neil .
 

pfi572

Active VIP Member
Joined
Mar 10, 2010
Messages
6,063
Reaction score
15,236
Location
Grande Prairie
These two were pretty rock damaged. Did around ten now. All have worked awesome.

Not going to get any better then that .
If you can do Sport Jet you can do the Hamilton or Scott as well .
I would advertise on the boating forums as well as lots of boats running around with wore out pumps .
Probably 90% . Lol
 

neilsleder

Active VIP Member
Joined
Oct 18, 2009
Messages
9,618
Reaction score
16,999
Location
Leduc Alberta
Not going to get any better then that .
If you can do Sport Jet you can do the Hamilton or Scott as well .
I would advertise on the boating forums as well as lots of boats running around with wore out pumps .
Probably 90% . Lol

Yah I would like to try a hammy and a Scott. I just did sport jets so I perfected it on mine and a couple of buddies before I tried selling the service. I’ve seen a few job from the professionals in the business and I would put my quality higher to be honest. But that’s because the machinist he has 40 plus years of doing turbines and impellers, I can’t say enough good about him to justify his work.
 

Cableguy

Active VIP Member
Joined
Dec 16, 2014
Messages
1,973
Reaction score
4,593
Location
Okanagan
its my buddys boat
he need to tune his up but he wants to buy a new one for a spare also
he spose to call sparwood today and steve in pg might have a new one also
when he gets a replacement I will get his existing one up to you thx neil
[h=1][/h]for a tune up thx neil i will get it to u
 

pfi572

Active VIP Member
Joined
Mar 10, 2010
Messages
6,063
Reaction score
15,236
Location
Grande Prairie
its my buddys boat
he need to tune his up but he wants to buy a new one for a spare also
he spose to call sparwood today and steve in pg might have a new one also
when he gets a replacement I will get his existing one up to you thx neil
[h=1][/h]for a tune up thx neil i will get it to u

Chris at OK Tire in Stoney Plain used to have new impellers as well for good pricing .
 

neilsleder

Active VIP Member
Joined
Oct 18, 2009
Messages
9,618
Reaction score
16,999
Location
Leduc Alberta
its my buddys boat
he need to tune his up but he wants to buy a new one for a spare also
he spose to call sparwood today and steve in pg might have a new one also
when he gets a replacement I will get his existing one up to you thx neil
[h=1][/h]for a tune up thx neil i will get it to u

Awesome thanks. Alway nice to have a spare! I need a spare to. Looking a decent impeller.
 

HotShotHarry

Active VIP Member
Joined
Aug 12, 2007
Messages
1,580
Reaction score
1,625
Location
HINTON
I think Kehoe Marine Parts will put a stainless wear ring in for you. He's local to Edmonton, I see your in BC....
I bought my impellers and wear rings from Kehoe Marine, but Im not sure if Roger is still working. He was trying to retire.
 
Top Bottom