testing a beacon

imdoo'n

Active VIP Member
Joined
Jan 15, 2008
Messages
57,029
Reaction score
50,070
Location
alberta
is there anywhere that can test beacons, to make sure they are doing what they are supposed to be doing. as in frequency, signal strength etc. may be easier to test before you find out the hard way. :beer:
 
Last edited:

SLEDBUNNYRACING

Bad Bunny
Administrator
Moderator
Joined
Oct 20, 2006
Messages
39,540
Reaction score
14,738
Location
Edmonton Alberta, Canada
Website
www.sledbunnyracing.com
is there anywhere that can test beacons, to make sure they are doing what they are supposed to be doing. as in frequency, signal strength etc. may be easier to test before you find out the hard way. :beer:

Yes - with a second beacon.
Do a distance check by moving to distances away to ensure it is sending properly, also turn the beacon in different directions to check antenna strength.
Reverse the process using the other beacon to check it's ability to receive.
Then have someone else bury it in the back yard and see if you can find it.
 

imdoo'n

Active VIP Member
Joined
Jan 15, 2008
Messages
57,029
Reaction score
50,070
Location
alberta
Yes - with a second beacon.
Do a distance check by moving to distances away to ensure it is sending properly, also turn the beacon in different directions to check antenna strength.
Reverse the process using the other beacon to check it's ability to receive.
Then have someone else bury it in the back yard and see if you can find it.

had the same idea, now which one is not working ?
 

imdoo'n

Active VIP Member
Joined
Jan 15, 2008
Messages
57,029
Reaction score
50,070
Location
alberta
get a 3rd one involved;)

would two of those be twins by chance. just askin.

yea thought of that also, will have to test against another beacon. just did not have that option at the time. have two, one seems to be down on transmit power.
 

polarice

Active VIP Member
Joined
Jan 8, 2008
Messages
14,842
Reaction score
2,200
Location
Calgary, Alberta, Canada
would two of those be twins by chance. just askin.

yea thought of that also, will have to test against another beacon. just did not have that option at the time. have two, one seems to be down on transmit power.

just do a group test before ya head out next trip
 

99summitx

Active VIP Member
Joined
Apr 21, 2007
Messages
1,650
Reaction score
106
Location
Red Deer AB
Turn your beacon ON, go out in your yard and hide with your dog and I'll see if I can find you:rolleyes:
 

imdoo'n

Active VIP Member
Joined
Jan 15, 2008
Messages
57,029
Reaction score
50,070
Location
alberta
Turn your beacon ON, go out in your yard and hide with your dog and I'll see if I can find you:rolleyes:

ok murphy is waiting, oh come over at night. may be a little harder to find me. :d:d:beer:
make it around 9 so i have time to dial 911.
 

imdoo'n

Active VIP Member
Joined
Jan 15, 2008
Messages
57,029
Reaction score
50,070
Location
alberta
murphy likes 99summit x, thinks he is dessert.:beer:
 

gimmepowder

Member
Joined
Nov 29, 2009
Messages
17
Reaction score
12
Location
Fort Saskatchewan
is there anywhere that can test beacons, to make sure they are doing what they are supposed to be doing. as in frequency, signal strength etc. may be easier to test before you find out the hard way. :beer:

If you have access to a Pieps DSP beacon, they can check and display the frequency of the signal received from other beacons. The function is accessed by switching the Pieps DSP into "search" mode, then pressing and holding the "enter" button until "F---" is displayed on the screen. The beacon will then display the frequency relative to the standard 457kHz frequency for avalanche beacons (ie: "F010" and an arrow pointing to the right of center, indicates that the beacon is receiving a signal that is 10Hz higher [457.010kHz] than the standard). Any shop that has a demo model Pieps DSP beacon should be able to check your beacon's frequency.
 
Top Bottom