M1100 turbo questions. Boondocker Hyjacker 2.0

SaskSummit

Active VIP Member
Joined
Jan 30, 2007
Messages
1,175
Reaction score
1,055
Location
Lloydminster
I have a couple question about the controller on a 2012 I just picked up. Boondocker Hyjacker 2.0. Can someone tell me what the stock boost pressure is on these units at 2200'.
I have heard it is about 13psi?
Also what is the max boost you can run on premium at the same altitude?
And what is the max boost you can run without putting head studs in.
Was at about 17-18 Psi in Valemount on the weekend running 25% race 75% premium.

Thanks​
 

sled_wrangler

Active VIP Member
Joined
Jan 2, 2012
Messages
762
Reaction score
808
Location
Stony Plain
I was told I don't need head studs in mine cause it be above 18 psi of boost but above that you would want them as for the rest of your questions I will find out this week just getting all my stuff installed right now .... call deano at mad motor sports I'm sure he can answer all your questions

Sent from my SGH-I337M using Tapatalk
 

SaskSummit

Active VIP Member
Joined
Jan 30, 2007
Messages
1,175
Reaction score
1,055
Location
Lloydminster
No dont get crazy. I still have 2 skidoos. I needed something for ditch banging. Cant beet the XM in the mountains. The kids works at WhiteKnucle. He is pretty pumped. Lol.

Sent from my SGH-I747M using Tapatalk
 

FRR

Active member
Joined
Nov 4, 2014
Messages
27
Reaction score
25
Location
Vermillon ab
2013 m1100 with head studs. Intake 2.5 in stright pipe. And have boondocker 2.0 installed. Seems no one can give me any true hp numbers. Was told it would make fifer rent power with different fuels but no one seems to know If anyone can answer i am thankful. If not it might be headed for the trash and off to white knuckle to get the Evo flash.
 

dragontamer

Active VIP Member
Joined
Sep 22, 2008
Messages
248
Reaction score
240
Location
Edson Alberta
Bite the bullet and get the re flash, I did the 4 stage re flash and works way better then it ever did with the boondocker box.


Sent from my iPad using Tapatalk
 

dragontamer

Active VIP Member
Joined
Sep 22, 2008
Messages
248
Reaction score
240
Location
Edson Alberta
I got mine re flashed for 200,220,240 and 260. Go any higher and you need to put head studs in. You can get re flashed for up to 310 plus I believe. Pretty sure 280 is the limit on the stock turbo. I ran it on 260 last weekend on premium 94 octane, det light didn't flash once. I sent my ecu to dons speed parts in wainwright and they re flashed it right there. Get the ecu back and all you have to do is install the det light strip and your horsepower switch.


Sent from my iPad using Tapatalk
 

markoo

Active VIP Member
Joined
Nov 9, 2008
Messages
421
Reaction score
361
Location
southern Alberta
If you are higher up like 7000 ft you won't get anymore than 220 hp with stock turbo. Biggest advantage with evo reflash is you won't be bouncing off the rev limiter all the time. Also changes timing. Boondocker box is not worth the money.
 

FRR

Active member
Joined
Nov 4, 2014
Messages
27
Reaction score
25
Location
Vermillon ab
Already have the head studs, waste gate slims, everything is done beside the reflash, what flash do you have bikeman??
 

dragontamer

Active VIP Member
Joined
Sep 22, 2008
Messages
248
Reaction score
240
Location
Edson Alberta
Good to go. Yeah I put the bikeman reflash in with their 3" exhaust. And clutching. Works really good.
 

FRR

Active member
Joined
Nov 4, 2014
Messages
27
Reaction score
25
Location
Vermillon ab
ok so i spent much of the afternoon reading on which re flash to use. Bikeman has the 4 map set up , an Evo does as well, I know the Evo setup is for the hill, as for the bikeman set up Im not sure if its for the hills or lake dragging but I also read that evo is saying you cant get anymore the 235 hp out stock turbo, where bikeman is saying 260 hp on pump gas and 300 hp on race fuel. unsure as to what to believe, this is a question for JUSTBOOSTIT but it doesn't seem like he is the CAT GOD he seems to think he is, if he was, he would shine some light on this and set us in the right path, but who knows maybe JUSTBOSTIT has gave up on the cat world seeing he did do up a Yamaha for the Edmonton sled show guess he would rather have the heavier one out of the two but really who puts a Yamaha in an arctic cat booth in a sled show
 

dragontamer

Active VIP Member
Joined
Sep 22, 2008
Messages
248
Reaction score
240
Location
Edson Alberta
I read all that same stuff. All I know is this bijeman stuff woke my sled right up, buddy of mine is doing the evo stuff, we will see how they compare.
 

trucker379l

Member
Joined
Feb 4, 2009
Messages
16
Reaction score
43
Location
South, sasky
Defiantly go with a re flash. I think both evo and bikeman products are good. I've been running a 2013 with a bikeman 200-260 tune, 3 inch exhaust, big intercooler, evo brv and cold air intake. Runs about 23-24 psi on the hill at 260 setting. Totally different sled than the '12 I had with a 2.0 BD.
 

0neoldfart

Active VIP Member
Joined
Nov 22, 2008
Messages
1,382
Reaction score
2,616
Location
Thorsby
ok so i spent much of the afternoon reading on which re flash to use. Bikeman has the 4 map set up , an Evo does as well, I know the Evo setup is for the hill, as for the bikeman set up Im not sure if its for the hills or lake dragging but I also read that evo is saying you cant get anymore the 235 hp out stock turbo, where bikeman is saying 260 hp on pump gas and 300 hp on race fuel. unsure as to what to believe, this is a question for JUSTBOOSTIT but it doesn't seem like he is the CAT GOD he seems to think he is, if he was, he would shine some light on this and set us in the right path, but who knows maybe JUSTBOSTIT has gave up on the cat world seeing he did do up a Yamaha for the Edmonton sled show guess he would rather have the heavier one out of the two but really who puts a Yamaha in an arctic cat booth in a sled show
All of EVO's testing and horsepower #'s come from elevation. The stock IHI turbo simply becomes inefficient after 18 lbs - and charge temps go through the roof. Retarding the timing helps somewhat. A good question to ask Bikeman is how they can get 260 hp on pump... Speedwerx can't with a reflash, either. The EVO big chute turbo kits run about 260hp on pump gas on the 1100T, and 280 on straight 100LL. I can tell you that no reflash works as well as the upgraded turbo kit - you truly have to ride one to appreciate this, instead of comparing "claimed" hp numbers.
For the record, Evolution Powersports comes from the same folks at Evolution Motorsports - well know for making supercars such as Ferrari's and Lamborghini's considerably faster. If it doesn't work - they don't sell it.
 

FRR

Active member
Joined
Nov 4, 2014
Messages
27
Reaction score
25
Location
Vermillon ab
Have any of you guys used or know much about waste gate shims, I just picked up a second m1100 , it has waste gate shim do I take them out if so any one know how, Bikeman says the reflash @ 260 will not work with them in there only for 310hp us
 
Top Bottom