2014 change to 2016 A arms

TROLLCAT

Active VIP Member
Joined
Nov 23, 2010
Messages
69,304
Reaction score
37,821
Location
Dease Lake BC
Can I use my lower 14 A arms and 16 spindles and order upper A arms and make this work

2014 proclimb 38"

is there a 2016 style front end with a 38" stance ?
 

CatMan16

Active VIP Member
Joined
Nov 25, 2007
Messages
1,185
Reaction score
1,832
Location
Red Deer
Can I use my lower 14 A arms and 16 spindles and order upper A arms and make this work

2014 proclimb 38"

is there a 2016 style front end with a 38" stance ?
Did a bit of searching and it looks like there were kits for 38" wide that included spindles and upper a-arms. I would assume you would use original lower a-arms. Not sure if you can get just the a-arms though.
 

jrusher

Active VIP Member
Joined
Jun 6, 2008
Messages
284
Reaction score
683
Location
Edmonton
I used the 16 spindles and z broz upper 38" a arms and kept the stock lower A arms to narrow my 15 viper up to 38" . I should of went with the 36" cat kit as i want to go narrower now
 

TROLLCAT

Active VIP Member
Joined
Nov 23, 2010
Messages
69,304
Reaction score
37,821
Location
Dease Lake BC
I tried and mocked up the 16 spindles and 38" a-arm (16)

kept the 14 lower a-arm and shocks

could not get ski mounting bolt level in the straight position

the ski mounting bolt is going to be a inch lower than stock

was going to ride today so put all the 14 stuff back on
 
Top Bottom