2016 M8000 LTD Clutching Upgrades

Clode

Active VIP Member
Joined
Jan 8, 2012
Messages
29,055
Reaction score
45,017
Location
BC
So who has some clutching wisdom they would like to share for my 16' 153 LTD. I am currently geared up with dalton weights. My sled is the early build with 43 degree helix. I have geared it up already.
 

Lund

Active VIP Member
Joined
May 4, 2013
Messages
4,243
Reaction score
11,242
Location
Vernon/Kelowna
So who has some clutching wisdom they would like to share for my 16' 153 LTD. I am currently geared up with dalton weights. My sled is the early build with 43 degree helix. I have geared it up already.

That's doesn't tell us much, what are you wanting, you not liking how it works?
 

Clode

Active VIP Member
Joined
Jan 8, 2012
Messages
29,055
Reaction score
45,017
Location
BC
That's doesn't tell us much, what are you wanting, you not liking how it works?

it works alright, I just think there is alot left in it to be had. I know they came set-up for much higher elevations than I normally ride. I think spring rate changes would help a bit. I ride 2200-6500ft. I don't have access anymore to parts for testing so I was hoping to save a few bucks and see if anyone has any insight for me.
 

Clode

Active VIP Member
Joined
Jan 8, 2012
Messages
29,055
Reaction score
45,017
Location
BC
I should also ask, has anyone tried the BMP kits for the m8000 with the team clutches?
 

snowcannon

Active VIP Member
Joined
Oct 29, 2015
Messages
421
Reaction score
737
Location
Salmon Arm
Isn't a straight 36 degree helix best for non-boosted setup? Or do the team clutches work better with 43...
 

Clode

Active VIP Member
Joined
Jan 8, 2012
Messages
29,055
Reaction score
45,017
Location
BC
Isn't a straight 36 degree helix best for non-boosted setup? Or do the team clutches work better with 43...

the early build 16's came with 43degree helix, the late builds came with a 48degree I believe
 

Allseasons

Active VIP Member
Joined
Jan 21, 2014
Messages
506
Reaction score
1,054
Location
Rocky
Clode, I’ve spent a lot of time and money on clutching my 16. Can you provide me with;
-any motor changes you’ve done.
-How many gram weights your at now
-Springs (stock, or aftermarket/rate)
-elevation
-belt
-current rpm, WOT loaded?
-fuel
-electric start?

Keep in mind, cats speedos are not accurate to begin with. I too believed strongly that there was a lot more I could have achieved through my secondary, when actual fact, I wasn’t loading the motor enough. I was trying very hard to hit 50mph in a climb, and tops I could only get to 46mph. Then I realized my speed sensor was wrong for my gearing and driver changes lol.

If there’s any other info you can provide, or what exactly you think your needing or wanting.
 

Clode

Active VIP Member
Joined
Jan 8, 2012
Messages
29,055
Reaction score
45,017
Location
BC
Clode, I’ve spent a lot of time and money on clutching my 16. Can you provide me with;
-any motor changes you’ve done. Rk-Tek stock compression head
-How many gram weights your at no Dalton fully loaded at 2400ft 8100rpm, less a gram at 6000ft 8050rpm. I will check the base weights when home.
-Springs (stock, or aftermarket/rate) Stock springs, early build LTD with 43degree helix
-elevation 2400-6500ft max
-belt OEM that the sled came with, check the number when home
-current rpm, WOT loaded? mentioned above
-fuel Shell 91
-electric start? Nope
Stock gearing in the chaincase, 8tooth drivers installed and a 3" powerclaw.
Keep in mind, cats speedos are not accurate to begin with. I too believed strongly that there was a lot more I could have achieved through my secondary, when actual fact, I wasn’t loading the motor enough. I was trying very hard to hit 50mph in a climb, and tops I could only get to 46mph. Then I realized my speed sensor was wrong for my gearing and driver changes lol.

If there’s any other info you can provide, or what exactly you think your needing or wanting.


Thanks I will get more info when I get home
 

Allseasons

Active VIP Member
Joined
Jan 21, 2014
Messages
506
Reaction score
1,054
Location
Rocky
Thanks I will get more info when I get home

Nope don’t need more info. All good. Honestly, your tapped and won’t improve on this set up. I imagine you are seeing 40mph track speed in a loaded climb WOT, when in actual fact your closer to 44-45mph actual. Though, I am curious how many grams your at. Fully loaded? 74 or the 77,s?

The only thing i liked more, was mildly stiffer springs, with a 42 helix, but I was pushing a little more ponies. Down the road, if you keep the sled and have to upgrade your primary, buy the 18 roller, and change your helix to a 48
 

Clode

Active VIP Member
Joined
Jan 8, 2012
Messages
29,055
Reaction score
45,017
Location
BC
Nope don’t need more info. All good. Honestly, your tapped and won’t improve on this set up. I imagine you are seeing 40mph track speed in a loaded climb WOT, when in actual fact your closer to 44-45mph actual. Though, I am curious how many grams your at. Fully loaded? 74 or the 77,s?

The only thing i liked more, was mildly stiffer springs, with a 42 helix, but I was pushing a little more ponies. Down the road, if you keep the sled and have to upgrade your primary, buy the 18 roller, and change your helix to a 48

I see 41-42 for track speed.

I have the 18 clutch on its way, and I will now get the 48 helix coming, thanks you very much.
 

Clode

Active VIP Member
Joined
Jan 8, 2012
Messages
29,055
Reaction score
45,017
Location
BC
I have the 64 gram weights fully loaded, dalton says 71.4 grams
 

Clode

Active VIP Member
Joined
Jan 8, 2012
Messages
29,055
Reaction score
45,017
Location
BC
The 18 clutch works great, consistent rpm, pulling the fully loaded weights at elevation with a 48degree helix and geared up. Excellent upgrade
 
Top Bottom