Suzuki 800 - what oil do you run?

Jorgy

Active VIP Member
Joined
Nov 26, 2013
Messages
943
Reaction score
2,080
Location
Beaumont
I should start off by saying this is my first thread in the arctic cat section as I made the move from Polaris to cat this off season...

Back on topic, I bought a 16 M8000 and looking to see what guys are running for oil? Arctic Cat APV, Amsoil, Redline or any others? I have about 6 jugs of Polaris gold left that I was running in my Polaris and am trying to find a reason not to run it in my cat till it's used up. I know many guys run arctic cat oil in pros. Please post what you use and why, thanks in advance.
 

AGGRESIVEZEBRA

Active VIP Member
Joined
Dec 1, 2014
Messages
399
Reaction score
434
Location
Edmonton
Cat oil only for me. no matter how expensive i feel oil is i always think a motor is more. i get guys run others just my .02 cents
 

tyman212

Active member
Joined
Mar 5, 2013
Messages
56
Reaction score
39
Location
Camrose Alberta
Cat apv oil for me as well. Figure I’m not going to put cheap stuff in it, so may as well run the oil designed for the motor. And it smells great!
 

Panzerdog

Active VIP Member
Joined
Jan 7, 2015
Messages
432
Reaction score
1,776
Location
Redwater
I ran amsoil yellow for 3years but switched to shell synthetic because I can get it at any Canadian tire and my friends have used it for years in there pro climbs with no problems. The yellow amsoil is gold like the Polaris oil I think you’ll be fine to run it but you should try and get tank empty before adding the new oil I don’t like mixing oil Good job getting a cat to
 

mountianguy

Active VIP Member
Joined
Apr 26, 2009
Messages
555
Reaction score
651
Location
stony plain
I use the Ctec 2 oil but have also used Amsoil in the past. The Polaris gold should be fine to use the old Suzuki 800 are as tough as they come. I use the Ctec because of its pour point in the cold, and for warranty. The Amsoil was cheap to buy and worked good.
 

tmo1620

Active VIP Member
Joined
Feb 28, 2008
Messages
3,765
Reaction score
7,076
Location
Whitecourt
Ran the Suzuki 800 since 2008, and the 800 HO Suzuki from 2011 on and used shell advanced synthetic on all of them from day 1, way better oil than arctic cat apv, way cheaper as well and easier to get, cat apv oil was one of the worst oils when us snow and mudders got that 2 stroke oil testing done about 7-8 years ago. The new ctec oil is good but it’s designed for the new ctec 800 and ctec 600 with the electronic oil pump and is not needed for the Suzuki. The Polaris VES gold is a better option IMO than AC apv oil, tested way better and if I remember correctly was one of the top “sled manufacturer “ oils that were tested at the time
 

Mike270412

Golden Boy
Joined
Apr 29, 2008
Messages
28,947
Reaction score
45,842
Location
GBCA
Yamalube. As recommended by the dealer who sold me the sled. He said it's just as good but cheaper .
 

mur190

Active VIP Member
Joined
Dec 17, 2008
Messages
976
Reaction score
1,169
Location
bonnyville AB
Yamalube. As recommended by the dealer who sold me the sled. He said it's just as good but cheaper .
Lots of Yama lube goes through cats in this neck of the woods cause it's half the price, I put over 6500k,s on Suzuki 800's running blue marble.
 

Jorgy

Active VIP Member
Joined
Nov 26, 2013
Messages
943
Reaction score
2,080
Location
Beaumont
Thanks for all the responses guys. No warranty left on it unfortunately. I've heard similar results of Polaris gold being a high quality oil. I also agree with running the oil down as low as possible to not mix it. What's the exact type of yamalube you guys run?
 

Mike270412

Golden Boy
Joined
Apr 29, 2008
Messages
28,947
Reaction score
45,842
Location
GBCA

FTP

Member
Joined
Dec 21, 2017
Messages
15
Reaction score
12
Location
Parkland County
Iv been running Amsoil intercepter since 2011. Ran in a 2010 M8HO 4300KM, 2015 CTEC600 1200km, and 2016M8000 stage 2 1600km. My buddy ran it in his 2013 XP800 ETEC 2500KM, pther buddy runs it in a 13 Pro 800. No failures of any kind to be reported. Also i inspect the pistons Through the y pipe regulary. Just pulled my 16 m8000 power valves and they have carbon deposits on them, but easily cleaned up. Also the pistons absolutley look like new!! The 16 has been running it since new. From what iv seen Intercepter does a really good job preventing wear while being cleaner burning.
Also i just rebuilt my CR250 running dominator. The piston is still reusable after all the beatings of WOT it took!!! i put a big bore into it and will continue to use Dominator from day 1. Decent price for good quality oil.
Have heard of guys saying it doesnt leave oil residue on the crank bearings? The cr250 had great oil film on all the parts during disassembly.
just me 2C$
 
Top Bottom